News

Corrosion in Exhaust Service: Where Stainless Actually Fails
2026-10-16
Stainless fails at predictable places: condensate inside the tube, chloride pitting outside, crevices behind clamps, oxidised weld roots and mixed-metal fixings. How to design against them.
Wall Thickness in Exhaust Tube: What It Costs and What It Buys
2026-10-16
Wall thickness drives weight, sound, bendability and weld tolerance at the same time. A section-by-section look at what thin wall and thick wall each buy on a fabricated exhaust system.
Brushed, Polished and Satin: Finishes That Survive Real Use
2026-10-16
Brushed, polished and satin surfaces age in different ways in real service. How each finish is produced, where titanium colouring fits in, and how weld dressing decides whether a finish survives.
Titanium Sheet, Tube and Billet: Why the Starting Form Changes the Job
2026-10-16
Sheet, tube, plate and billet each impose their own cutting, forming and welding route. Why the starting form of titanium decides tooling, scrap and how a custom part is actually built.
Reading a Mill Certificate: What Material Traceability Actually Shows
2026-10-16
A mill certificate proves the chemistry and heat number of the metal, not the quality of the finished part. What traceability really covers, and what a fabrication shop has to demonstrate separately.
Aluminium Alloys for Intercoolers, Tanks and Piping
2026-10-16
6061, 5052 and 3003 each behave differently under the torch. How alloy and temper choice shapes intercooler end tanks, catch cans, fuel and water tanks and charge piping in an engine bay.
Stainless Grades in Exhaust Service: 304, 321, 347 and 439 Side by Side
2026-10-16
304 is the baseline, 321 and 347 are stabilised against heat, and 439 carries no nickel. A side-by-side look at how the four grades behave in exhaust service, in the weld and under corrosion.
Titanium Grades for Exhaust Work: Grade 1, Grade 2 and Grade 5
2026-10-16
Grade 1 and Grade 2 are commercially pure while Grade 5 is an alloy, and that difference changes forming, welding and service life. A practical guide to choosing titanium grades section by section on an exhaust system.
Page 25 of 33
Total 33 Pages
Go To