A dyno comparison is only as good as its method. Baseline discipline, heat soak, run order and repeatability decide whether a before-and-after result means anything at all.
A burst figure describes one assembly in one condition, not the product. Why the joint usually fails before the hose, and which conditions a quoted number leaves out entirely.
Engine vibration, road input and body flex all load the same welds. How fatigue starts at a weld toe, why restraint matters more than thickness, and how to read a cracked exhaust part.
A fabricated exhaust part answers repeated heating and cooling differently from a single hot run. Why cycling exposes joints, how distortion accumulates, and what a cycle rig can and cannot prove about a part.
Not every second pass is a failure. The difference between a second operation, a repair and a genuine remake, and how a shop decides whether salvage is honest.
The fit is decided before the arc starts. How dry fitting, tack sequence and alignment checks keep a fabricated assembly from pulling out of shape during full welding.
Consumables are process variables, not shopping list items. How shielding gas, filler wire, electrodes and cups change the weld before technique ever enters the picture.
The first run teaches the shop what the drawing did not say. What gets locked after a part has run once, what gets re-checked anyway, and where repeat savings actually come from.